Main Steps Explained
1 Clean
Remove dust, dirt, hair and any loose bits of existing glue.
2 Apply atom
Use only a little, but ensure a film goes right to the edges, onto one surface. on the shoe not the build You can always add more.
3 Line up
4 Hold very tightly
Clamp and hold it really tightly for about 7-30 seconds. The Atom needs to go all the way to the edge and there needs to be enough so that it just comes out the edge when you press it together. But no more.
Wipe up excess straight away .Once you have pressed the 2 pieces together, do not move them or pull them apart, as they then may not stick. If this happens dry both surfaces with a rag, regrind and start again. If still not sticking, leave clamped for 5 minutes
DO NOT grind until dry! If there is any doubt, WAIT! Wear eye protection if any doubt still exists
Remove dust, dirt, hair and any loose bits of existing glue.
2 Apply atom
Use only a little, but ensure a film goes right to the edges, onto one surface. on the shoe not the build You can always add more.
3 Line up
4 Hold very tightly
Clamp and hold it really tightly for about 7-30 seconds. The Atom needs to go all the way to the edge and there needs to be enough so that it just comes out the edge when you press it together. But no more.
Wipe up excess straight away .Once you have pressed the 2 pieces together, do not move them or pull them apart, as they then may not stick. If this happens dry both surfaces with a rag, regrind and start again. If still not sticking, leave clamped for 5 minutes
DO NOT grind until dry! If there is any doubt, WAIT! Wear eye protection if any doubt still exists
Regluing existing edging/rand
Do 5cm at a time or what ever you are comfortable with
If you are going to be regrinding the edge. Use the glue bottle nozzle.
If you are doing it with out regrinding the edge. Use small screwdriver or your knife blade ... dnt shut knife with glue on it.
If you are going to be regrinding the edge. Use the glue bottle nozzle.
If you are doing it with out regrinding the edge. Use small screwdriver or your knife blade ... dnt shut knife with glue on it.